1. You are the administrator of a Windows 2000 Server computer that has FIVE hard disks. Four 100 GB hard disks on the server are configured as a single stripe volume. You want to reconfigure the fourth disk so that the volume is fault tolerant and has as much space possible available for storing data. You want to use only existing hardware. What should you do?
A. Convert the disk to dynamic disk shutdown and restart the server
B. Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume
C. Backup the data on the stripe volume and delete the stripe volume. Create a mirror volume, shut down and restart the server. Restore the data to new mirror volumes
D. Backup the data on the stripe volume and delete the stripe
E. None of the above
2. You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer. Your Windows 2000 Professional client computers can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit. “The server on which the printer resides does not have a suitable HP LaserJet printer driver installed”. You want the printer driver to be installed automatically on the Windows NT Workstation computers. What should you do?
A. Copy the Windows NT 4.0 Printer Drivers to the Net logon shared folders on all Windows NT Server 4.0 computers still configured as BDCs
B. Copy the Windows NT 4.0 printer drivers to the Net logon shared folder on the PDC emulator
C. Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000
D. Copy the Windows NT 4.0 printer drivers to the Winnt\System32\ pri liter s\dri vers folder on the Windows 2000 print server
E. None of above
3. Your company’s network includes Windows 3.1 client computers, Windows 95 client computers, and Windows 2000 Professional client computers. The company’s manufacturing facilities run 24 hours per day. The company has developed its own 32-bit application that collects information from the manufacturing process so that workers on one shift can find out that was manufactured during the previous shift. The company wants to make the application available on all of the client computers by using Terminal Service on a Windows 2000 Server computer. This server will not run as a domain controller. You install Terminal Services. The information technology (IT) department needs to be able to remote control users’ sessions to support and troubleshoot the application. What should you do to enable the IT department to control users’ sessions?
A. Configure the Terminal server to run in Remote Administration mode
B. Grant the IT department Full Control permission to the Remote Desktop Protocol (RDP) on the Terminal server
C. Add the members of the IT department to the Power Users group on the Terminal server
D. Use third-party software to enable remote control of users’ sessions
E. None of above
4. You are the administrator of contoso.local domain. You organize the domain into organizational units as shown in the EXHIBIT. You configure the local security options and other settings for the default domain policy object You delegate administration of Michigan and Florida OU. You want to prevent those administrators from creating any other group policy objects with settings that conflict with those you configured. What should you do?
A. From the group policy options from the contoso.local domains set the option not override
B. From the group policy options from the Michigan and Florida OU, set the option not override
C. Block the group policy inheritance for the contoso.local domain
D. Block the group policy inheritance for Michigan and Florida OU
E. None of above
5. You are the administrator of a Windows 2000 Server computer. The server contains one network adapter and is a file and print server for critical company resources. You install a second network adpater in the server and connect it to the same network subnet as the first adapter. You want to ensure that the first adapter is used for all network traffic and the second adapter is used only if the first adapter fails or is disconnected from the network. You also want to ensure that the server always has network connectivity even if one network adapter fails. What should you do?
A. Set the second adapters status to disable
B. Configure the first adapter to use a TCP/IP metric of 100
C. Configure the second adapter to use a TCP/IP metric of 25
D. Configure the binding order on the second adapter to bind TCP/IP last
E. None of above
Warning: Undefined variable $in_same_cat in /www/wwwroot/mtexam.com/public_html/wp-content/plugins/EXP.GKFEED.COM/function.php on line 27
Warning: Undefined variable $excluded_categories in /www/wwwroot/mtexam.com/public_html/wp-content/plugins/EXP.GKFEED.COM/function.php on line 27